| homeowner | architect | contractor | dealer | property manager |
|
|
|
|
| Products Satin Color Collection Performance Durability Warranty Sustainability Green Attributes Installation Guides |
|
|
|
|
|
|
|
 |
| Material Safety Data Sheet (pdf) |
| Three-Part Specifications (pdf) |
| Property | Test Method | Unit | Value |
| Density | ASTM D792 | g/cm_ | 0.55 |
| Water Absorption | ASTM D570 | % | 1.0 |
| Hardiness | ASTM D2240 | Shore D | 50 |
| Tensile Strength | ASTM D638 | psi > | 2150 |
| Elongation at Break | ASTM D638 | % | > 13 |
| E-Modulus | ASTM D638 | psi | 130000-220000 |
| Flexural Strength | ASTM D790 | psi | > 4600 |
| Compressive Strength | ASTM D695 | at 10% Deformation psi | > 900 |
| Nail Hold | ASTM D1761 | ibf/in of penetration | 60 |
| Screw Hold | ASTM D1761 | ibf/in of penetration | 400 |
| Charpy Impact Strength | ASTM D256 ft | ft lb / in | > 1.7 |
| Izod Impact Strength | ASTM D256 | ft lb / in | > 1.8 |
| Vicat (B/50) | ASTM D1525 | °F | > 160 |
| Heat Deflection Temp @ 1.8MPa °F | ASTM D648 | °F | > 135 |
| Coefficient of Linear Expansion | ASTM D696 | in / in/ °F | 3.2 x 10-5 |
| Flammability (USA) | UL 94 | V-0 | |
| Flammability (UK) | BS476; Part7 | 1Y | |
| Flammability (France) | NFP 92-501 | M1 | |
| Burn Rate | ASTM D635/UBC-26-7 | CC1:none when flame removed | |
| Flame Spread Index | ASTM E84 | 20 | |
| Windload Resistance | ASTM D5206 | psf | 70 |
| Surface Distortion A | STM D3679 | °F | > 180 |
| Camber | ASTM D3679 | in | 1/16 |
| Heat Shrinkage | ASTM D3679 | % | 23.00% |
| Uniformity of Color | ASTM D3679 | Passed |
| Building Sustainability with NuCedar (pdf) |
| Warranty and Care Guide (pdf) |
| Green Attributes | LEED Certification Opportunities | NGBS Certification Opportunities |
| 100% Recyclable | √ | √ |
| 20% Recycled Material in Substrate | √ | √ |
| Low VOC solar-reflective coating: • Matches performance of ENERGY STAR rated Cool Roof materials* • Reduces heat transfer from sun’s rays (NIR) • Reduces energy required to cool a home (5-9% dependent on region and insulation) • Permits dark colors to be used in warm climates |
√ | √ |
| Minimal maintenance costs (materials, labor, energy) • No water absorption or swelling • No rotting • Impervious to insects |
√ | |
| Interlocking Matrix™ creates tight exterior envelope • Withstands 200 mph winds • Exceptional weather barrier • Strong and durable |
√ | |
| Length of boards and consistency of product produce less waste during installation | √ | |
| Substrate is produced in ISO 14001 certified factories | √ | |
| Lifetime limited warranty (substrate and coating) | √ |
Note: Certification opportunities are based on LEED for New Construction 2.2 and NAHB Model Green Home Building Guidelines.
